Jeep Paracord Projects

Part #:

Decided to do a little paracord for the Jeep. This is just to showcase what can be done. I need to make some roll bar grab handles, zipper pulls for the rear window and probably do some work on the steering wheel.

Additional Parts:
Paracord 550

Tools Needed:

Grab handles for the rear seats. These are attached to the front seat headrest posts.
Soft top zipper pulls. You can easily flip them up and hide them under the velcro flap of the soft top window.

N-m	Ft. Lbs.	In. Lbs.

This page last updated: 29-Oct-2021

Content and Design © 2002-present WanderingTrail, Ronald Seegert
Common Sense and Safety should always be observed when working on your vehicle or doing modifications. Jackstands, wheel blocks, disconnecting the battery are a few of the basic safety precautions that should be used and may not be mentioned in the write ups on this site. You are responsible for your own installation, these write ups are a helpful guideline and should not be taken as an official installation instruction. My write up may be different from the kits currently out there, so alwasy double check the manufacturers installation instructions when installing anything. I try to keep the site up to date with changes that have occured as I discover them, but may not have the latest unless someone lets me know. If you feel that an install is above your capabilities after reading my write ups, I recommend getting together with a club and getting some help. Only a few times have I needed to employe some actual help from a shop to get something done. Usually welding or A/C work. While I have spent many years working on mechanical systems, I am not an expert, nor do I pretend to be one. I hope these write ups have been useful to you.
All trademarked names & logos are property of their respective owners
This site is in no way associated with FCA.
Jeep is a registered trademark of FCA.